| 1234567891011121314151617181920212223 |
- decibel_value=Current decibel value:
- voice_status_default=No detected speak
- voice_status_start=Detected to start speaking
- voice_status_finish=Detected to end speaking
- voice_status_result=The recognition result is:
- voice_status_error=Recognition error : voice is too low or long
- voice_tip_content="Hi Nibiru" is a wake-up words, purely used to wake up \nspeech recognition.After that, you need to rely on online \nrecognition to get the result. If the result is defined \nin your code,then the logic is executed.\n(so the demo defines the ‘move right’ logic)
- voice_say_content=Say 'Hi Nibiru, Move Right'
- voice_say_content_left=Say 'Hi Nibiru, Move Left'
- voice_say_content_volume=Please say "Volume Up"
- voice_tip_content_v="Volume Up" is a wake-up word for the predefined logic of \nthe SDK (there is no need to say" Hi Nibiru ") and the \ncorresponding logic is automatically executed when the \nrecognition result exactly matches it, without the \ndeveloper having to define it in the code.
- next_demo_text=Next
- last_demo_text=Last
- start_rec=Start Recording
- stop_rec=Stop Recording
- voice_status_cancel=Recognition Canceled
- api_desc=This is an example of an interface that performs voice recognition. \nFor a detailed description of the interface, see the development documentation .\n In addition to wake-up words and interface calls,\n you can use the device's voice-activated keys. \n See the Hardware Guide in the switch documentation for details. \nThe voice keys defined by different models may differ \n (or may not have a voice key)
- voice_say_content_2=Hold and say "Move Right"
- voice_say_content_3=Please Lift the button
- remindbox_lower_power=Low power! Please charge.
- remindbox_nkey_tip=Long press N key to recenter first
- remindbox_shutdown=Power off
- remindbox_reboot=Reboot
|
